[FREE] 1/250 U-2 Dragon Lady Papercraft

 Lockheed U-2, nicknamed "Dragon Lady", is an American single-jet engine, high altitude reconnaissance aircraft operated by the United States Air Force (USAF) and previously flown by the Central Intelligence Agency (CIA). A high-altitude, all-weather intelligence aircraft, U-2s have taken part in Cold War and supported several multinational NATO operations in Iraq and Afghanistan.

DOWNLOAD

[PREMIUM] 1/72 Helwan HA-300 Papermodel

Helwan HA-300 light supersonic interceptor aircraft developed in Egypt during the 1960s. A very ambitious project for Egypt, eventually the project was cancelled due to cost overrun and political factor.

PREVIEW

yep i think that's too much underside view

Prototype ver. (Ecardmodels)

[PREMIUM] 1/72 HAL Marut Papermodel

HF-24 Marut (Sanskrit for "Spirit of the Tempest") was a Indian 60's fighter-bomber aircraft. It was Indian first jet aircraft produced and also Asian jet fighter to go into mass production. Designed by Kurt Tank, it was originally purposed as interceptor aircraft but spent most of its service as a ground attack aircraft.

Cool design for a 50's-60's aircraft, could had better fate.

Unknown Sq. (now resides in Vishweshwaraya Industrial and Technology Museum, Bangalore)

Ecardmodels

[PREMIUM] 1/72 Mitsubishi A7M2 Reppu Papermodel

 The Mitsubishi A7M Reppū (烈風, "Strong Wind") was designed as the successor to the Imperial Japanese Navy's A6M Zero, with development beginning in 1942. Performance objectives were to achieve superior speed, climb, diving, and armament over the Zero, as well as better maneuverability. To meet these performance specifications its size and weight were significantly greater than its predecessor. The A7M's allied codename was "Sam".

A7M2, revised version of A7M1, powered by a 2,200 hp (1,600 kW) Mitsubishi Ha-43 engine, with a maximum speed of 627 km/h (389 mph). Armament the same as previous model, or four 20 mm (.80 in) Type 99 cannons. The A7M2 was to be the main production aircraft of the A7M series. Three were converted from A7M1. One massproduction type under assembling at the end of the war.

The model can be bought here: 

Prototype ver. (Tokopedia) (Ecardmodels)

352 Kokutai (IJN Air Group) (Tokopedia) (Ecardmodels)

[PREMIUM] 1/72 Daimler Benz DB-Jager Papermodel

This Daimler Benz aircraft project was basically designed around an engine that was being developed at that time. The Daimler Benz Jäger (not its official name) was of a conventional layout with the exception of the propellers location. The engine was mounted in the fuselage nose, with an annular radiator in front. The wings were unswept and exhibited no dihedral and were mounted below the fuselage. The tail was of a conventional design, with its single fin and rudder. Because of the propellers arrangement, a tricycle landing gear had to be used. A single pilot sat in the cockpit that was located towards the rear, just ahead of the contrarotating propellers.

Where the Daimler Benz Jäger differed from most aircraft was its unusual propeller placement. The Daimler Benz DB 609 development began in September 1942, and it was to be an in-line, 16 cylinder injection-type aircraft engine. It was to develop 2700 horsepower, although this could be increased in later version to 3400 horsepower. Allowance was made for fitting a four-stage supercharger, and with its inverted V design, the DB 609 would have been ideal for a large caliber cannon installation, such as the MK 103, MK 108 or MK 212 cannons.

Although a mockup of the forward fuselage was built (as far back as the propeller location), and because of this engine's long development time (actual delivery wasn't schduled to begin until April 1947), the RLM cancelled its development in May 1943. And, along with the DB 609 cancellation, so went the Daimler Benz Jäger project.

Pretty cool (or weird) looking aircraft, just like every other German paper project they got those fictional feeling (but with a slight realism, like something you would see on Ace Combat).

This aircraft livery is loosely based on Walter Nowotny's Me-262

Another livery is also available (based on Erich Hartmann's aircraft ), but i haven't got the time to actually finish it yet.

Both models are available for purchase here:

Kommando Nowotny, Achmer 1944 (Tokopedia)(Ecardmodel)

JG52, Hungary 1945 (Tokopedia) 

[PREMIUM] 1/48 KAI KT-1B Woongbi Papermodel

KAI (Korea Aerospace Industries) KT-1 "Woongbi" is the first indigenous Korean aircraft ever build, with single Pratt&Whitney Canada PTA-62 engine, Woongbi is used as basic training aircraft and also as aerobatic aircraft. Woongbi's first export costumer is Indonesia with 12 unit aircraft in 2001.

3-side view of Woongbi, it looks so much like Pilatus PC-9 it almost seems like a copy.

early 3D render in Sketchup, i add roundel and other stuff later.

Testbuild result, i resize the model to 1/72 for ease of storage.

This model was originally a commission work but now allowed to be released as premium model.

It can be bought on links below:

102nd Training Squadron (Tokopedia)(Ecardmodels)

Jupiter Aerobatic Team (to be added)

[PREMIUM] 1/48 Grob G120TP Papermodel

Grob G120TP was a double-seat training aircraft built by a Geman aircraft manufacturer, Grob Aircraft. Based on Grob 115TA training aircraft, made of carbon fibre reinforced plastic, it was designed for both military and civilian pilot training.

Preview:

This model was originally a commission work but now allowed to be released as premium model.

It can be bought on links below:

101st Training Squadron (Tokopedia)(Ecardmodels)